The portable measurement kit contains everything you need to monitor and measure your compressed air or gas system. Ideal for auditors and consultants.
Examples of Data Analysis
| Sensor | Measurements | Examples of Data Analysis |
| Rogowski Coil | Amps | – Estimate power use (kWh) of each compressor and cost to run the compressors – Check system configuration and control – Check compressor performance – Combine kW with flow rate to get system performance (specific power) |
| Flow Meter | Gas Flow Gas Temperature |
– Gas flow rate, peak, average and minimum – Gas consumption (eg hourly, daily, weekly, monthly) – Check for excessive baseline gas flows which could indicate poorly utilised consumption – Combine flow with kW to get system performance (specific power) |
| Dew Point Sensor (with integrated Pressure sensor) | Dew Point Dry Pressure |
– Check moisture levels in the gas – Check dryer function – Combine with other pressure data to understand losses (pressure drops) |
| Pressure Sensor | Gas Pressure | – Wet or dry pressure at critical points – Analyse pressure cycles and losses (pressure drops) |
| Temperature Sensor | Ambient Temperature | – Check if ambient temperature is effecting compressor or dryer performance – Check compressor / dryer inlet and outlet temperatures |