This compact dew point sensor is suitable for refrigerant, desiccant, drum and membrane dryers. Its proven polymer film technology provides strong contamination resistance. The precision sensor design compensates for drift caused by temperature, contamination and aging, providing long-term, reliable, high-accuracy measurements.
Best Suited to compressed air and gas systems up to 4 MPa (600psi) and small spaces.
Important
- A minimum flow rate of > 1 L/min is required for the sensor to read accurately
- This sensor does not measure pressure, nor does it have an alarm relay
- Relative humidity must not exceed 85%
- The sensor must be installed in an upright position, after the dryer.
- Incorrect wiring or installation can damage the sensor and void the warranty. If you aren’t sure how to install or wire the sensor, please contact us. Full installation and wiring instructions are available in the User Manual.
Mini Dew Point Sensor Pack
- Dew Point Sensor
- Measurement Chamber with adjustable silencer and removable Nitto type quick connect
(contact us for other measurement chamber options) - M8 connector, 5 pin
- 5 meter data cable
- Calibration certificate
- User Manual
- 12 month warranty
Warranty & Calibration
12 month warranty
Calibration is recommended every 2 years (provided the sensor is not exposed to relative humidity above 85%).
Annual calibration is required if the sensor is exposed to relative humidity above 85%.
Accessories
Accessories such as mechanical and electrical fittings are available on the Accessories page.
Other information
Part Numbers: DEM100001, DEM200001
