This wall mount dew point monitor is suitable for refrigerant, desiccant, drum or membrane dryers. The sensor design provides long-term, reliable, high-accuracy measurements.
The Dew Point Monitor has an in-built display and alarm (red/green light and buzzer).
Important
- A minimum flow rate of > 1 L/min is required for the sensor to read accurately
- The sensor must be installed in an upright position, after the dryer.
- Incorrect wiring or installation can damage the sensor and void the warranty. If you aren’t sure how to install or wire the sensor, please contact us. Full installation and wiring instructions are available in the User Manual.
Wall Mount Dew Point Monitor Pack
- Wall mount dew point sensor
- 1.5 meter power cable with USA, EURO, UK or Australian power plug
- 6 mm PTFE tube with nitto fitting. Tube length: 1.5 meters (5 foot) long
- Calibration certificate
- User Manual
- 12 month warranty
Warranty & Calibration
12 month warranty
Calibration is recommended every 2 years (provided the sensor is not exposed to relative humidity above 85%).
Annual calibration is required if the sensor is exposed to relative humidity above 85%.
Accessories
Accessories such as mechanical and electrical fittings are available on the Accessories page.
Other information
Part Numbers
- -60°C to +60°C (-76°F to +140°F) Dew Point Range: DEW011001, DEW012001, DEW013001, DEW014001, DEW015001, DEW111001, DEW112001, DEW113001, DEW114001, DEW115001
- -80°C to +20°C (-112°F to +68°F) Dew Point Range: DEW021001, DEW022001, DEW023001, DEW024001, DEW025001, DEW121001, DEW122001, DEW123001, DEW124001, DEW125001
- -110°C to +20°C (-166°F to +68°F) Dew Point Range: DEW031001, DEW032001, DEW033001, DEW034001, DEW035001, DEW131001, DEW132001, DEW133001, DEW134001, DEW135001
